Welcome to Your High Frequency Plasma Generator
Congratulations and Welcome!
Firstly, I’d like to personally thank you for purchasing one of my handcrafted High Frequency Plasma Generators.
Every generator is individually assembled and thoroughly tested before leaving my workshop to ensure it arrives ready for you to enjoy.
Whether this is your first experience with high frequency plasma technology or you’ve owned similar equipment before, this guide has been written to help you become familiar with your new generator and ensure you have the best possible experience from the very first session.
Please take a few minutes to read through this guide before switching your generator on for the first time.
Contents
- Welcome
- What’s Included
- Getting to Know Your Generator
- Before You Begin
- Installing the Plasma Bulbs
- Your First Plasma Session
- Recommended Session Times
- How to Hold the Plasma Bulbs
- Looking After Your Generator
- Spark Gap Maintenance
- Important Safety Information
- Frequently Asked Questions
- Need Help?
What’s Included
Your package should contain the following items:
✔ High Frequency Plasma Generator
✔ Spark Gap Assembly with 100% Adjustable Zinc Rods
✔ Two Plasma Bulbs
✔ Mains Power Cable
✔ Online Owner’s Guide
If anything appears damaged during shipping, please contact me before operating the generator.
Getting to Know Your Generator
Although each generator is individually handcrafted, every machine contains the same core components.
High Frequency Generator
This is the heart of the machine.
It converts incoming mains electricity into high-frequency electrical energy that is used to create plasma inside the bulbs.
Spark Gap Assembly
The spark gap rapidly switches the electrical energy using two adjustable zinc rods.
This rapid switching action produces the high-frequency oscillations that are characteristic of traditional Tesla-inspired plasma generators.
The clear protective cover allows you to safely observe the spark while protecting the internal components.
Zinc Rods
The spark gap uses adjustable solid zinc rods.
These rods can be inspected, cleaned and replaced when required as part of normal maintenance.
Cooling Fans
Two cooling fans provide continuous airflow through the generator.
Always ensure the ventilation openings remain clear during operation.
Plasma Bulbs
The plasma bulbs contain a carefully prepared low-pressure gas.
When high-frequency electrical energy reaches the bulbs, the gas becomes ionised and produces beautiful visible plasma.
Before You Begin
Before using your generator for the first time, please complete the following simple checks.
✔ Place the generator on a flat, stable surface.
✔ Ensure the cooling fan vents remain unobstructed.
✔ Check that the spark gap cover is securely fitted.
✔ Keep the generator away from water and damp environments.
✔ Keep sensitive electronic equipment away from the generator.
Once these checks have been completed, you’re ready to install the plasma bulbs.
Installing the Plasma Bulbs
Installing the bulbs only takes a few moments.
Step 1
Locate the two plasma bulb sockets on the front of the generator.
Step 2
Carefully insert each bulb into its socket.
Step 3
Gently screw each bulb into position until finger tight.
Do not overtighten.
Step 4
Check both bulbs are secure before switching the generator on.
Your generator is now ready for use.
Your First Plasma Session
When using your generator for the first time, it is always best to begin with shorter sessions.
This allows you to become familiar with the operation of the generator while enjoying the relaxing experience of using high frequency plasma.
Many owners choose to sit comfortably in a quiet environment while holding one plasma bulb in each hand.
Some enjoy listening to relaxing music, reading or meditating during their session.
Recommended Session Times
I recommend gradually increasing your session length over your first week.
Day One
15 minutes
Day Two
15 minutes
Day Three
20 minutes
Day Four
20 minutes
Day Five
25 minutes
Day Six
25 minutes
Day Seven onwards
Up to 30 minutes per session.
Many owners find one session each day perfectly adequate.
How to Hold the Plasma Bulbs
For normal operation, hold one plasma bulb comfortably in each hand.
Relax your shoulders and allow your hands to rest naturally.
Avoid gripping the bulbs tightly.
Simply hold them comfortably throughout the session.
Many owners enjoy sitting in a comfortable chair while using the generator.
Choose a calm environment where you can relax without interruption.
Looking After Your Generator
Like any quality piece of equipment, your plasma generator benefits from occasional routine maintenance.
Fortunately, very little maintenance is required.
I recommend:
✔ Keeping the exterior clean.
✔ Keeping the ventilation openings free from dust.
✔ Occasionally inspecting the spark gap.
✔ Cleaning the zinc rods when necessary.
✔ Storing the generator indoors in a dry environment.
Spark Gap Maintenance
Over time, repeated electrical discharges naturally create small oxide deposits on the zinc rods.
This is completely normal.
Occasionally cleaning the rods helps maintain consistent operation.
Cleaning takes only a few minutes.
- Unplug the generator.
- Remove the four screws securing the clear spark gap cover.
- Carefully clean between the zinc rods using a 0.40 mm feeler gauge.
- Replace the clear cover.
- Tighten the four screws.
- Your generator is ready for use again.
Important Safety Information
For your safety, please read the following carefully.
Do Not Use This Generator If:
- You are pregnant.
- You have a pacemaker fitted.
- You have an implanted electronic medical device.
- You have been advised by your healthcare professional not to use electrical equipment of this type.
Keep Away From Sensitive Electronics
High-frequency electrical fields may interfere with nearby electronic equipment.
Please keep the generator well away from:
- Televisions
- Desktop computers
- Laptop computers
- Tablets
- Mobile phones when practical
- External hard drives
- Wi-Fi routers
- Sensitive electronic test equipment
Operate the generator in an area where nearby electronics cannot be affected.
General Safety
- Never operate the generator near water.
- Never cover the cooling fans.
- Always unplug the generator before carrying out maintenance.
- Do not attempt to modify the electrical components.
- Keep out of reach of unsupervised children.
Frequently Asked Questions
Why do the plasma bulbs glow?
The bulbs contain a low-pressure gas that becomes ionised by high-frequency electrical energy.
Why can I hear a buzzing sound?
The sound comes from the spark gap as electrical discharges rapidly occur between the zinc rods.
This is a normal part of operation.
How often should I clean the spark gap?
Cleaning frequency depends on usage.
Regular visual inspection will indicate when cleaning is required.
How long should I use the generator?
I recommend gradually increasing your sessions until you reach approximately 30 minutes.
Can I use the generator every day?
Many owners choose to use the generator daily as part of their personal wellness routine.
Need Help?
If you have any questions regarding your High Frequency Plasma Generator, I am always happy to help.
Email:
I also invite you to join our friendly Telegram community where owners can ask questions, share experiences and receive ongoing support.
Thank you once again for choosing one of my handcrafted High Frequency Plasma Generators.
I hope you enjoy using it for many years to come.
Best wishes,
Alan
Founder
High Frequency Plasma
Disclaimer
The High Frequency Plasma Generator is intended for educational, experimental, research, meditation, relaxation and general wellness purposes only.
It is not a medical device and is not intended to diagnose, treat, cure, mitigate or prevent any disease or medical condition.
Always seek advice from a suitably qualified healthcare professional regarding medical concerns.
Always follow the safety guidance contained within this Owner’s Guide.